While applying the magnetic connector, great attention should be paid to the influence of some external factors on it. Therefore, special attention must be paid to the maintenance of the magnetic connector during application to ensure that its service life can be extended and subsequent maintenance procedures can be reduced.

The influence of environment on the magnetic connector

1. Moisture resistance

The constant humidity and heat test conditions are 90%~95% relative humidity and +40±20℃. If the environment is too humid, the moisture intrusion will affect the connection's insulation performance. At the same time, it will corrode the metal parts, thereby reducing the service life of the connector and changing its performance.

2. Salt spray resistance

Suppose you must operate in an environment full of moisture and salt for a long time. In that case, the metal structure of the pogo pin magnetic connector and the surface treatment layer of the contact is likely to have galvanic corrosion, which will affect the physical and physical properties of the magnetic connector and affect electrical performance.

3. Temperature resistance

The maximum temperature rise allowed by the connector under the rated working current is clearly specified in practical application work. If the specified temperature is exceeded, it is not allowed. Otherwise, it will have serious consequences for the product. Because when the connector is working, the current will generate heat at the contact point, resulting in a temperature rise, so the operating temperature should equal the sum of the ambient temperature and the contact temperature rise.

The correct way to store the magnetic connector

First, when you receive the pogo pin connector, you need to check whether the outer packaging is intact. If the outer packaging is damaged, you must check whether the pogo pin connector is damaged. You must ensure that the pogo pin connector is used. It is intact.

Second, pogo pin connectors that are not used temporarily need to be installed and stored correctly rather than placed at will, let alone in a place with sunlight, because pogo pin connectors are easily damaged if exposed to sunlight. Therefore, When it needs to be used, it cannot be used normally, so the pogo pin connector cannot be used due to improper placement, which is more than the loss.

Third, as mentioned above, pogo pin connectors cannot be placed in the sun, and where else can they not be placed? pogo pin connectors cannot be placed in high-temperature places, humid places, and places with chemicals. High temperature and humidity can easily damage pogo pin connectors. However, where there are chemicals, it is easy to corrode the metal of the pogo pin connector and destroy the gold-plated layer of the pogo pin connector, so there is no conductive function when using the pogo pin connector. Therefore, these places must not be placed when placing the pogo pin connector.

Fourth, when the pogo pin connector is in use, even where it exists, there can be greasy objects. If it is contaminated with greasy objects, the pogo pin connector will not work properly and will be no different from waste products.